FRONTPAGE       SITEMAP      CONTACT  
ABOUT US         PRODUCTS         NANOTECHNOLOGY         ENVIRONMENT         DEALERS         PRESS         NEWS        
 
 
Products > Household > Glass / sanitary > Direction of use

DIRECTION OF USE - GLASS / SANITARY

 
IN ORDER TO ACHIEVE THE BEST POSSIBLE RESULT, YOU SHOULD DO THE FOLLOWING:
 
Suitable surfaces:
All types of glossy tiles and ceramic surfaces on for example: wash basin, cistern, glass plates, mirrors, shower stall door made of synthetic material etc. This package includes enough for treatment of an average bathroom with content.
 
Preparation:
Clean and polish the surface in the usual way. Do not use cleaning products described as “active”, as they contain active ingredients that counteract the nano treatment. Slightly abrasive cleaning products such as various types of scouring powder are recommendable. Particularly chalk and soap residue must be removed. Cleaning is essential for a good result.
 
Nano treatment:
Open the seal and put some of the nano treatment fluid on the enclosed sponge. Distribute the fluid on the surface with circular movements. Make sure that the whole surface is covered by the nano treatment fluid. If a “greyish haze” forms after the treatment, put some of the fluid on the sponge again and polish once more. After this, the surface may not be touched/used for at least 30 minutes. After this period, the process is completed. To ensure that the surface has been properly treated, you can put a little water on the surface. If drops appear, the nano treatment has been carried out correctly.
 
Durability/Cleaning:
The durability depends on wear and the cleaning products used. It is no longer necessary to use harsh cleaning products, you can just clean with water, possibly with a mild non-abrasive cleaning product. If the treatment has been carried out correctly, the product will work for approx. 6 months. After this, the surface can be treated again.
 
Effect:
After the nano treatment, chalk, soap residue, dirt and other impurities will be much easier to remove. Furthermore, water will no longer form a closed layer of film on the surface, but become single drops.
 
Consumption:
50 ml is estimated to cover 10 m2.
 
Note:
It is still necessary to clean the surfaces, but the process will be much easier.
 
Nano treatment does not work on non-glossy surfaces, such as matt floor tiles.
 
If all the nano treatment fluid has not been used, it should be stored with the sponge in a dry and cool place.
 
We recommend using gloves, just as for cleaning!
 
TC Nano - TC Nano bottom navigation menu
TCNano ▪ Danmark ▪ (+45) 31 50 90 01 ▪ info@tcnano.com  ▪  Copyright © 2008 TCnano Technologies. All Rights Reserved.
TC Nano - Bottom Bar
Backward - TC Nano Top - TC Nano Print - TC Nano