|
IN ORDER TO ACHIEVE THE BEST POSSIBLE RESULT, YOU SHOULD DO THE FOLLOWING:
Preparation:
Clean and polish the surface like you use to.
Notice: Alcohol-containing cleaning fluid can damage the surface. Do not use cleaning products described as “active”, as they contain active ingredients that counteract the nano treatment. Cleaning is essential for a good result.
Avoid using cleaning fluids with “active” substances. Cleaning is crucial for the result.
Nano treatment:
Open the seal and put some of the nano treatment fluid on the enclosed sponge. Distribute the fluid on the surface with circular movements.
If a “greyish haze” forms after the treatment, put some of the fluid on the sponge again and polish once more. After this, the surface may not be touched/used for at least 30 minutes. After this period, the process is completed. To ensure that the surface has been properly treated, you can put a little water on the surface. If drops appear, the nano treatment has been carried out correctly.
Effect:
After the nano treatment of for instance the visor rain drops will no longer form a film at the visor but will appear as single drops. When driving 70 km/h the view will be improved as the rain drops will wind of the visor. At other surfaces like a boat window or other suitable surfaces made by Plexiglas salt, lime and other impurities are much easier to remove.
Notice:
If all the nano material fluid has not been used, it should be stored with the sponge in a dry and cool place.
Working temperature: 5-30 ºC
Does not stand up to subzero temperatures
|
